Cause analysis on the possible causes of cylinder liner wear of ceramics-Supply-Dezhou Changhong Machinery Manufacture Co., Ltd


Dezhou Changhong Machinery Manufacture Co., Ltd
Contact person: Chang Li
Mob:+86 18562150128
Fax: 0534-2358517
Address: NO.6 Kehai Road Tianqu Industrial Zone Dezhou Shandong China

Position:Index > Supply

Cause analysis on the possible causes of cylinder liner wear of ceramics

News sources:[content:source]   Release time:[content:date]   Views:[content:visits]

Ceramic liner is one of the main part of the combustion chamber, sometimes small parts also plays a big role. now renumbered as you introduce the causes of abnormal wear of the cylinder liner.
1. the upper portion of the cylinder wear:-associated with the inhalation of large amounts of dust or severe carbon should maintain or replace air filter, remove the carbon, and check for channeling oil.
2. cylinder worn in the lower part: engine oil contains a lot of metal wear debris or dust, clean oil should be replaced.
3. cylinder worn in the Middle: with engine cold cold boot on corrosive wear and frequent relevant, should check the cooling system.
4. the first check point on serious wear of piston rings: indicate engine overheating, heat is not good, you should check the cooling system, ignition system (including spark plug selection), and check that the connecting rod big end bearing is loose.
Previous:没有了!Next:-Mounted dual-mounted metal liner

Other Related Products

Index | About | Product | News | Supply | Certificate | Sales network | Contact us | | top | seo:
Copyright 2012 Dezhou Changhong Machinery Manufacture Co., Ltd - All rights reserved.

山东沂源滋鑫核桃研发有限公司 河北振驰路桥工程有限公司 金土地勘察钻探工程技术有限公司 北京仪特诺电子科技有限公司官网 巩义市大地建材制造有限公司 泰方线缆机械有限公司 淄博宇林钢结构有限公司 三地彩票 幸运飞艇app苹果版 北京同创联达科技有限公司